You sweep the patio, you scrub a spot with a brush, you even try the pressure washer. The little black dots don't budge. They're scattered across the concrete like someone flicked a paintbrush, each one with a raised middle and a faint pale ring around it.
Those aren't dirt, and they aren't stains. They're alive — and that's exactly why nothing in the garage touches them. Here's what they are and how they actually come off.
It's Lichen, Not Dirt
Those black (sometimes dark green or gray) spots are lichen — a hardy organism that's part fungus, part algae. It shows up on concrete, pavers, natural stone, and the north, shaded sides of patios and walkways where moisture lingers. Look closely and you'll see the telltale raised center with a lighter halo.
Because it's a living organism that bonds to the surface, it behaves nothing like ordinary dirt. You can't rinse it, and you can't scrub it away.
Why the Pressure Washer Loses This Fight
Lichen anchors itself to the surface with root-like structures that dig into the pores of the concrete. To blast it off with water pressure alone, you'd need enough force to etch and pit the concrete itself — trading one problem for a worse one.
The only thing that actually works is killing the lichen first with the right cleaning solution, letting it release its grip, and then rinsing it away at a safe pressure. That's the core of professional concrete cleaning and patio cleaning.
What Not to Do
- Don't crank the pressure. You'll scar the concrete and still leave lichen roots behind.
- Don't reach for bleach at random strengths. The wrong mix damages nearby plants and can discolor some surfaces.
- Don't just scrape it. Scraping removes the visible top but leaves the anchor, so it returns fast.
How the Pros Remove It
A proper treatment applies a cleaning solution that kills the lichen at the root, gives it time to work, then clears it with a controlled rinse and a surface cleaner for an even finish. On pavers, we're also careful with the joint sand. Done right, the whole surface comes back uniform — not a patchwork of clean and spotted.
Keeping It From Coming Back
Lichen loves shade and moisture, so trim back overhanging branches to let sunlight reach the surface and make sure water drains instead of pooling. Keeping the concrete clean removes the grime lichen feeds on. Spores travel on the wind, so you can't prevent it forever — but a clean, dry-draining surface slows it down a lot.
Fighting a losing battle with black spots? Send us a photo or text (351) 242-0666 for a free estimate.




